Monday, November 16, 2026

Role Playing Minis

Get it? Because one is for role-playing and the other is role-playing? You could even use him for role-playing if you're role-playing as a role-player! ... OK, I'll stop now. Anyway, I was given a tiny little fairy figure to paint as a challenge. A few years ago I might have been able to do it with my naked eyes, but the way my eyes are now I needed to use a magnifier for the entire process. At around the same time I came across a very fun model of an orc dungeon master, and ended up switching between one and the other as I went, finishing the orc very soon after the fairy.

Fairy:
The fairy had a sort of generic flight base molded-in. I cut that off, trying to preserve the shape of the back and the rear of the legs. I designed a scenic base to replace it, modifying the Stormwind Knight Sword by Slusho and merging it with a skull from a Skeleton Warrior by BigMrTong in Blender, flattening the bottom and adding a channel for a pin down the center. I scaled these to be a little larger than typical 35mm scale, to make the fairy look a little smaller. After figuring out how I wanted the fairy to attach, I drilled a hole into the fairy's back and modified the sword, bending the pin as needed. The base was a Cobalt Keep 25mm round base, with a smaller ring magnet instead of a disc magnet in order to accomodate the end of the pin. Since the model was very small, light, and slightly delicate, a small magnet seemed to be enough, while a larger one might require enough force to remove from a metal case that there might be a chance of damaging the model. I carved away at the blade with a rotary tool and small round bit to make it look old and eaten away by rust. I used a pair of cutters to break off some pieces of resin from a misprinted stone golem (I did this underwater to ensure there would be no harmful resin dust in the air) and glued them to the base as rocks, then filled the rest of the space with a Citadel texture paste. I decided to paint the model and the base separately. I primed the base black, then basecoated the entire thing with Citadel Layer Skrag Brown. I drybrushed the blade over the brown with Vallejo 72.054 Game Color Gunmetal to create rusted look. I painted the handle with Scalecolor SC-72 Viking Gold, then filled the inner surfaces of the grip area with Citadel Colour Tin Bitz. I drybrushed the entire handle with Scalecolor SC-73 Dwarven Gold. After some deliberation I chose red for the gem, applying a mix of Green Stuff World 1832 Redwood Brown and Citadel Colour Base Khorne Red. I picked out a smaller area in just Khorne Red, then then successively smaller areas in Citadel Colour Base Mephiston Red, then Vallejo Game Color Bloody Red. I painted the skull Vallejo 71.122 Model Air US Desert Armour 686, then I dryrbrushed it Vallejo 71.132 Model Air Aged White. I picked out a couple of the rocks in Formula P3 Bastion Grey, and one in Pro Acryl 074 Warm Grey. I dryrbrushed over the rocks and the Skrag Brown earth with Two Thin Coats 10027 Elven Skin.

I applied The Army Painter Quickshade Dip Dark Tone to the entire base with a brush, making sure to dab up the excess. I felt the base was looking too dark, so I dryrbrushed the sword handle with Citadel Colour Layer Auric Armour Gold, the blade with Vallejo 72.053 Game Color Chainmail Silver, and the skull with a touch of Aged White then Two Thin Coats 10036 Trooper White. I added a tiny dot of Citadel Layer Wild Rider Red to the gemstone. I then decided the skull looked too perfect for something pierced with a sword, so I painted black cracks around the blade then highlighted around them with Trooper White to make it look more three-dimensional. Finally I painted the base rim black. I had originally intended to apply a verdigris effect to the sword handle, but forgot until after the varnish, and ultimately decided to leave it off.

I decided to try painting the fairy directly without priming, and I didn't feel like that caused any issues. As I applied the first couple of basecoats, I kept feeling dissatisfied with the model, applying a touch of epoxy putty and trying to use sculpting to fix various proprtions or add detail. This happened two or three times before I felt I had done all I could.

I picked out the cloth with Citadel Foundation Knarloc Green, the leather in Two Thin Coats 10029 Boar Hide, the wooden bow and arrow shafts in Green Stuff World 1834 Quicksand Brown, the bone/horn details in Two Thin Coats Ivory Tusk, the feathers in Vallejo 70.950 Model Color Blue, and the hair in Vallejo 72.008 Game Color Orange Fire.

The skin was basecoated in Two Thin Coats 10025 Barbarian Brawn. I went over most of it with Two Thin Coats 10026 Dwarven Skin, then highlighted with Two Thin Coats 10027 Elven Skin. The face was completely blank, save for a tiny little nub of a nose. So I tried to create some detail - a mouth, shadow under the nose, and eye sockets - using Barbarian Brawn. I very carefully added a tiny dot of Trooper White in the eye sockets, painted on eyebrows with Boar Hide, then dotted the eyes with a Rotring Isograph 0.1mm with black Technoart drawing ink. Well, the actual process was a lot more back-and-forth, but that's what it boiled down to.

I tried brushing Green Stuff World 1673 Colorshift Holographic onto the wings, hoping for an iridescent effect, but instead it just looked metallic. So I tried to carefully remove the paint using 70% IPA, then using The Masters brush cleaner. I think I got most of it, maybe all, it was hard to tell. I shaded the body with the Army Painter dip, trying to prevent pooling and keep it off the wings. Some of the dip did get onto the wings, so I very very carefully removed it using a cheap brush and very very tiny amounts of household paint stripper.

The dip had added some shading, but it was inconsistent due to the shallow or outright missing details. So I "blacklined" the various areas using Green Stuff World 1852 Scorched Wood, creating a lot more definition between the different surfaces while mostly matching the shading of the dip.

I highlighted the cloth with Vallejo 72.730 Game Air Goblin Green, the blue feathers with The Army Painter QP 1114 Warpaints Crystal Blue, then the wood with a mix of Quicksand Brown and Citadel Foundation Iyanden Darksun - this felt too close to the skin colour so I glazed it with Citadel Shade Seraphim Sepia, which seemed to help. I highlighted the leather with a mix of Boar Hide and Reaper 09225 Master Series Paint Redstone Highlight. The hair was highlighted Iyanden Darksun then then glazed with Orange Fire. The bone/horn was highlighted Trooper White, then glazed Seraphim Sepia to darken them and make them stand out less, and make them look a bit more like horn.

I varnished the still-separate model and base with Mr. Hobby Mr. Color GX 113 UVCut Flat. I think I applied it too heavily and it felt a touch cloudy after it dried. So I brushed on a bit of olive oil then let the two pieces sit in some warm water with a bit of dishsoap for a while, before brushing and rinsing off with clean water. This seemed to help. Finally I applied Mr. Hobby Mr. Color GX 112 UVCut Gloss to the wings (to make them look clearer) and the gems (to make them look shinier).

Now all that was left was to glue the two parts together. While trying to remove the fairy from the temporary pin, I accidentally bent the top half of the bow. I don't think it did any real damage to the plastic itself as it was a little rubbery, but the paint (and/or varnish) cracked and left visible whitish lines along the top half of the bow. There wasn't really much I could do about that. I decided to use Madworks black superglue to attach the fairy the base, but despite my care this still ended up going places where I didn't want it (like the bottom of one foot), and in the end I think clear glue would have worked just fine. Doing it before the matt varnish would have also solved the issue with the superglue being shiny.

The base was looking a little bare, so I glued some Gale Force Nine Spring Undergrowth to the base using some synthetic resin wood glue. I put a few tiny dabs of glue on the base, dabbed them with a wet brush to try to thin it a bit, then pressed on the undergrowth. I wasn't happy so I thinned a bit more glue very heavily with water and dabbed that onto the hobby undergrowth with the brush, completely saturating it. I had been considering doing this before the matt varnish, but I forgot. I definitely could have done a better job of the assembly. Oh well.


Orc DM:
I printed the model - Dungeon Master Randon by JLuna3D - and cast a base topper using Green Stuff World Brown Stuff epoxy putty. I don't remember if I used my Green Stuff World Flagstone texture rolling pin or my Basius Sanctuary texture pad. I attached both the table and the orc himself to the base before priming. I did this because I planned to paint him at the hobby club and didn't want to be taking parts back and forth, but it did make make things a WHOLE lot harder than if I had been painting the two parts separately. I also accidentally broke the mug's handle while cleaning off supports, so I replaced it by drilling two holes with an 0.5mm drill bit and gluing in a tiny piece of 0.5mm copper wire I believe came from an ancient Formula P3 pinning kit (and then using putty to fix the inevitable mistakes).

I'm listing all the painting steps for each part here, but I actually put down all my basecoats first, cleaned everthing up, then went back with details and highlights. It was quite a long fiddly process due to all the small details and obstructions (arms, table legs, etc) making it hard to get the brush onto some surfaces in the orientation I wanted.

The skin was basecoated Green Stuff World 1797 Acrylic Color Forest Green and highlighted with Green Stuff World 1798 Acrylic Color Hunter Green then Green Stuff World 1820 Acrylic Color Flubber Green. I blocked in each highlight then thinned the paint with a bit of Green Stuff World 1746 Master Medium to glaze over the transitions; I didn't feel like this was flowing quite the way I wanted, but it was useable. I picked out the teeth in Vallejo 71.122 US Desert Armour 686 then Vallejo 71.132 Model Air Aged White. The hair was Vallejo 70.862 Model Color Black Grey, drybrushed with Citadel Base The Fang then Formula P3 Frostbite.

I wasn't sure what to do with the glasses. In the end I decided to try to imitate the look you get when glasses with really strong magnification make the wearer's eyes look much bigger, pretty much filling the frames when viewed from the right angle. To that end I filled them with expoxy putty to give me a flat surface. I painted the rims in Scalecolor SC-73 Dwarven Gold, then filled the lenses in black. To fill each lens with an eye, I painted over most of the lenses with Two Thin Coats 10036 Trooper White, leaving a black outline. I then went over most of the white with a large black dot, leaving only a bit of white on each side. I filled the black dot with a smaller dot of The Army Painter WP1113 Warpaints Electric Blue, and finally placed a tiny black dot in the center using a Copic Multiliner SP 0.05 (I had intended to use my 0.03 but picked up the wrong pen and didn't realise it). In order to try to enhance the "lens" effect, I placed a drop of Green Stuff World 2019 Transparent UV Resin over each lens and cured it with a UV light; as I hoped this had a subtle magnifying effect on the eyes.

The leather shoes, belt, and DM screen were basecoated in Two Thin Coats 10029 Boar Hide, blacklined with Green Stuff World 1852 Acrylic Color Scorched Wood, and highlighted with Two Thin Coats 10025 Barbarian Brawn. I used parallel feathering to highlight the folded areas of the DM screen to create the impression of creases. The shirt was Citadel Edge Fulgrim Pink, blacklined with a mix of Fulgrim Pink and and Green Stuff World 1798 Acrylic Color Sangria Red, then highlighted with Fulgrim Pink mixed with Formula P3 Morrow White. The tie was The Army Painter WP1113 Warpaints Electric Blue highlighted with Formula P3 Frostbite. The jeans were basecoated Vallejo 70.925 Model Color Blue, blacklined with actual black, then highlighted using thinned The Army Painter QP1462 Warpaints Viking Blue. For the shirt and tie I blocked in the highlights first then thinned the paint and smoothed the transitions with glazing, for the jeans I used feathering in different directions to create a rough fabric effect.

The dice were picked out in Vallejo 72.021 Game Color Magic Blue, Vallejo 72.010 Game Color Bloody Red, Vallejo 72.026 Game Color Jade Green, Vallejo 72.006 Game Color Sun Yellow, and Citadel Layer Temple Guard Blue, with white or black dots representing the numbers. The figurines were painted Citadel Layer Temple Guard Blue highlighted Citadel Edge Baharroth Blue, Citadel Foundation Gretchen Green highlighted with Gretchen Green mixed with Citadel Colour Base Averland Sunset and Formula P3 Morrow White, Vallejo 72.776 Game Air Alien Purple highlighted with Two Thin Coats 10018 Runic Purple, Vallejo 70.862 Model Color Black Grey highlighted Vallejo 70.869 Model Color Basalt Grey, Vallejo 72.008 Game Color Orange Fire highlighted Citadel Edge Lugannath Orange.

The mug was just Two Thin Coats 10035 Ivory Tusk. The drink inside was basecoated with my old mix of Daler Rowney "Graduate Acrylic" 201 Burnt Sienna, Phoenix Artist's Acrylic Value Series 690 Vandyke Brown, and Phoenix 601 Raw Sienna, then I applied a touch of Reaper 09225 Master Series Paint Redstone Highlight in the center, attempting to create a "swirl" effect. The paper was Vallejo 71.132 Model Air Aged White, with a few spots of shading with Citadel Shade Seraphim Sepia. The scribbles on the paper were in Vallejo 70.869 Model Color Basalt Grey, with the "map" coloured in with Citadel Edge Baharroth Blue and Green Stuff World 3230 Acrylic Color Rotten Green.

The pencil body was painted in Citadel Colour Base Averland Sunset. The eraser housing was picked out in Scalecolor SC-73 Dwarven Gold and the eraser itself in Vallejo 72.010 Game Colour Bloody Red, with Fulgrim Pink mixed in for the highlight. On the other end the wood was painted in Green Stuff World 1834 Acrylic Color Quicksand Brown, with the graphite tip in black.

I basecoated the table and chair in Green Stuff World 1834 Acrylic Color Quicksand Brown, and the floor with Formula P3 Bastion Grey. I shaded both together with a mix of Vallejo 73.596 Glaze Medium, The Army Painter WP1135 Quickshade Washes Strong Tone and The Army Painter WP1136 Quickshade Washes Dark Tone. I needed to be careful with the wash so I used the glaze medium to increase the drying time so I could work more slowly. I actually mixed in the black Dark Tone by accident, but I'm glad I did, I think it looked better than the dark brown Strong Tone would have alone. I lightly drybrushed the wood with Citadel Foundation Iyanded Darksun and the stone with Pro Acryl MPA-074 Warm Grey.

After painting the base rim black, I varnished the model in Mr. Hobby Mr. Color GX 112 UVCut Gloss, then Mr. Hobby Mr. Color GX 113 UVCut Flat. I think I applied this too heavily, because it came out looking a slightly shiny satin. So I tried again, this time turning down the pressure a bit and trying to reduce the flow on my Badger 250; this is a syphon feed airbrush so you don't have as much control as a gravity-feed double-action. For some reason the varnish seemed to "speckle" this time, giving a slight "pebble" finish. So I increased the pressure a bit and fiddled with the flow, and tried a couple more times, and finally it came out looking OK. Finally I put a couple of drops of the gloss varnish over the glasses to keep the glass looking shiny, although I might have messed up a bit as there seems to be a blemish in the photos. Luckily it's very hard to see in person.



I do really like the orc model, so I tried to put in the work to make him look good. Again, it would have been easier if I had painted the two parts separately, but I'm happy with how he turned out. The fairy was a more frustrating affair, being so small and with so little detail. I tried, but I'm not really happy with how it turned out. It just feels like I put too much effort trying to put lipstick on a pig. Well, it's certainly good enough for tabletop use, and I am quite happy with the base.

No comments:

Post a Comment